How To Properly Use A Rubbing Compound

Get a Flawless Finish: Learn How to Properly Use Rubbing Compound for Your Car’s Exterior

Spread the love
Please note that this post contains affiliate links, and I am compensated if you make a purchase after clicking on any of my links in this post.

It is a component that is used as part of the process of resurfacing old paintwork. This article will give you a few tips on how to use a rubbing compound properly, if you are concerned about this.

Rubbing Compound

As soon as you discover that your car has been scratched, you will be able to dispel any anxiety you may have

Do you ever get stressed out that even after you provide your beloved car with careful protection, you might get scratches on it? The prospect of getting a car scratch for most people is unsettling, especially if you see that another individual has intentionally harmed one of your most valuable possessions.

There are a number of possible reasons why the vehicle might be having trouble, such as because it has crashed into a tree, had an accident, or parked incorrectly.

A tiny scratch on the covering of the car could ruin the inside of the car, and this could cause you to feel moody for days afterward. You can get a new coating for the overlay on your baby car by bringing it to a local auto body shop. If you have a lot of money, then that may be a good option for you as the cost of restoring it is extremely high.

Thus, by using a rubbing compound, you will be able to keep your car looking new without spending a lot of money. You can do this by yourself and it is a cost-effective, efficient method that you can use.

The steps should be followed before applying rubbing compound

1. Preparing all the needed items

By ensuring that all the following things are at hand, it means you are now ready to take care of the scratch by yourself.

As far as rubbing compound is concerned, it must be a good quality material, as it is the abrasive content of rubbing compound that helps remove damaged paint from the surface of the layer. In short, it acts as a magical cure that will help restore your car’s charm and make it shine again!

If you are going to use an orbital polisher, you must fix it over a wool pad.

See also  Michelin X Tour A/S T+H Review: Honest Assessment of a Reliable Costco Exclusive Tire

Whenever you are performing a safe, you may use sandpaper that is ultrafine and dry, such as the kind that you can find in any shop for auto spare parts.

An orbital polisher or buffing machine can be used as an alternative to this. With the help of it, it will be easier for you to remove the scratches.

Shoe polish: black or white

To remove dirt completely, you will need to use soap water.

To clean off the surface when done with rubbing compound and wiping off wax, a dry towel is used for applying the compound and wax and wiping away the residue when done.

It is important to wax your car as a final step.

2. Clear up the surface of your car

Rubbing Compound

Make sure that you clean up the area where the scratches are before applying the rubbing compound

Before you apply the rubbing compound on the area with scratches, you should clean the area where the scratches are to ensure that the rubbing compound can work effectively in this area. The entire surface of the car can be made clean with a little bit of extra effort.

You should first wash the entire car cover with a soapy water solution in order to make sure it is clean. As soon as the covering has been cleaned, it needs to be rinsed with plain water. In order to clean it up, you should then use a dry cloth to wipe it up. As a final step, you need to consider the areas of your car that need to be focused on removing scratches and evaluate the type of scratches that need to be removed.

3. Sanding down to the scratches layer

Depending on how much scratch or chip you have, or just how deep it is, you might not need to perform this step.

It is impossible to remove a scratch from your vehicle with clear precision since it looks like a mark on your vehicle. There is therefore a major focus on making the blemishes undetectable in order to make them disappear. We will take off a thin layer of paint from the neighboring surface until we reach the scratch layer in order to resolve this problem. If you want to achieve this goal, you can use sandpaper in order to do so.

See also  Maximize Your Driving Experience: Our Comprehensive Review of Continental ExtremeContact DWS06 Tires - Is it the Right Fit for Your Vehicle?

The part below a scratch does not need to be sanded down before it is painted. You can use black or white shoe polish to wax over the scratches if you want them to be more noticeable, so you’ll have to use that to wax over them.

As a starting point, take a wooden chunk and sand it as smooth as possible with sandpaper, then spray water over it and use soap to clean it up. Then, using gentle strokes on 60 degrees angles, the scratches will be sanded away. When you move the sandpaper up and down, it has an effect on the sanding action. Until no contrasting mark is present, you must follow all the steps that have been described before.

Preparation done, then how can we use the rubbing compound?

Now let’s take a closer look at how to use rubbing compound after you have sanded the surface (if needed) and anything that needs to be polished has been polished.

1. Applying the Rubbing Compound

The orbital polisher is equipped with a wool pad that is framed in the center. After that, you should apply a thin layer of rubbing compound straight onto the painted area of the scratches to remove them. There are many kinds of rubbing compounds on the market, but most of them can be found in squeeze tubes which make it easy to use them. If you are going to use a tissue, you should take a few compounds and apply them over the scratch when the compound is in a can.

A good way to apply the rubbing compound to scratches is to place the orbital polisher on the scratch and spray the compound directly on the scratch. The only thing you should worry about is that if you don’t have an orbital polisher, your hands can be a backup option. Using a dry towel, apply a hard pressure and move the rubbing compound over the skin, rubbing the compound with your hands as you move the towel over.

2. Painting, Polishing, Waxing, and make it done!

You should never worry about scratching your car to the point that it reaches the metal if you have a touch-up kit and paint to help you overcome this problem. If a chip or scratch falls to the paint or to the metal of the vehicle, it will not impact the vehicle in any way. Nevertheless, if it falls on the pigment, just apply a clear coat.

See also  Continental VikingContact 7 Review: Unmatched Performance for Safe and Confident Driving in Severe Winter Conditions

In order to polish the car’s covering, you need to use a wool pad after you have cleaned and removed nearly all of the rubbing compound from the surface.

It is essential to also consider how important it is to protect the area where you have used the rubbing compound when waxing. If you sanded the surface before applying the wax paste, you can get the best results. Any wax can be applied with a slight scratch.

Let’s not forget to take a moment to stand back, take a look, and enjoy your hard work.


In the event that you follow the steps in the article properly, the scratch parts will be completely removed. Light scratches can be removed without much effort, but if there are deeper scratches, you might need more time and patience in order to remove them. Even in the worst situations, if you look closely enough to see them at all, you can still catch a glimpse of them.

Although it may seem impossible, it is just a matter of time before you master the technique of using a rubbing compound, and you will soon be able to master it. It is very likely that if the steps listed above are achieved successfully, you will gain more confidence in the work that you did on your own. I believe that one of the best things about the new coat is that you can enjoy your dear car with its new look.

Similar Posts