DIY Guide: Change Your Car Tires with Ease – Follow These Simple Steps and Save Money Today!
When traveling on the highway at a speed of sixty miles per hour, the only things keeping you attached to the pavement are the four sections of rubber that make up your tires. In the event that one of these tires were to burst or explode, both of which are common occurrences, the consequences could quite literally be catastrophic. To your good fortune, taking care of the tires on your car and changing a tire on your car, should the need occur, is not a difficult task at all. If you follow our easy instructions, your safety will be ensured, and you will be able to continue your journey without incident.
Take out the spare tire and the jack and proceed to remove broken tires
In order to replace a tire on a car, you must first raise the vehicle on jack stands. A jack ought to be included with your vehicle, but if not, you can find them for a low price at most auto parts places. After making sure that the ignition is turned off and the handbrake is engaged, slightly loosen the wheel nuts and position the lift so that it is under the jacking point located on the underside of your vehicle. To replace an old tire with a new one, you will need to elevate the vehicle using the jack in such a way that it is accessible to remove the old tire without difficulty and has sufficient space for the new tire to be installed.
It should now be possible for you to thoroughly remove the wheel nuts, as they have already been loosened. In order to avoid bending or snapping the wheel bolts, you should begin by removing the nuts on the left and right sides of the wheel and save the upper nut for last. You could ask a friend to support the tire for you while you remove it from the vehicle. After all of the wheel bolts have been removed, remove the tire with caution and set it down on the ground, taking care not to scratch the rims or the alloys.
Place the spare tire on the hub and tighten the nuts
Before tightening the wheel nuts, make sure that the new wheel has been carefully installed on the vehicle in place of the old one, and enlist the assistance of a neighbor to check that it fits securely on the bolts. Lightly tighten the nuts so that you have enough space to maneuver the wheel and make sure it is seated securely on the bolts. Check that the tire is mounted correctly and that the air opening is pointing in the direction of your body. Before you place it on, you can check its appearance by comparing it to the other wheels in your collection. Bring the shaft down gradually. As soon as your vehicle makes contact with the pavement, give the bolts a good tightening.
If you want improved fuel economy and even tread wear on your tires, you should check the air pressure in your tires on a regular basis. In addition, you should change the tires at 7,500 mile intervals so that each tire lasts longer. When you brake in a seamless and even manner, you lessen the likelihood of skidding, which can cause damage to your tires. When you position carefully, you can protect your tires from being damaged by the curbs, which can also shorten their lifespan. If you follow these steps, you will save time, avoid trouble, and avoid wasting money.
Last but not least, place the damaged tire in the trunk of your car and transport it to a repair shop. Before you do that, you need to get an estimate for the cost of restoring your damaged tires. A flat tire caused by a minor puncture can typically be repaired for less than twenty dollars. If the tire is beyond repair, you have the option of either throwing it away or finding another use for it.
